1. What's the shipping time when we prepaid the deposit?
We will deliver the machine within 7-15 days when we recieve your prepaid deposit.
2. How about the packing?
Wood box. Three wood boxes per set. The wood can be fumigated. See the picture below.
We will deliver the machine within 7-15 days when we recieve your prepaid deposit.
2. How about the packing?
Wood box. Three wood boxes per set. The wood can be fumigated. See the picture below.
3. How about the installing and trainning?
We will send our engineer to your factory to install and train.
4. What is the maximum power?
It's 300-500 Watt.
5. What is the speed when engraving?
The speed can be 10-18 meter/minute.
6. What's the difference of blade and laser cutter plotter in terms of usage?
1) Hurt glass, leave scratches
(a)When use blade, it don't hurt the glass, there's no scratches on glass.
(b)When use laser, the laser can burn the glass, leave a unconspicuous scratches on glass. The scratches donot affect for sandblasting, ice sculpture, etc.
2)Use blade first, then use laser
The laser can be used for secondary operation, deep/further processing. For example: use the blade mode, carve a graphic, use sandblasting(or ice scalpture), now the glass has been rough, then if you want make other graphic on the graphic you just made, cause the glass is rough by sandblasting, you cannot use the blade mode, it will broke the needle, so the laser can do it(cause laser ray don't touch the glass). Then use painting or other process. This can make graduated oil painting glass and other more complex, beautiful art glass.
7. How can the thickness of glass be?
The glass thickness can be 2mm-30mm.
More questions please don't hesitate to contact us.
We will send our engineer to your factory to install and train.
4. What is the maximum power?
It's 300-500 Watt.
5. What is the speed when engraving?
The speed can be 10-18 meter/minute.
6. What's the difference of blade and laser cutter plotter in terms of usage?
1) Hurt glass, leave scratches
(a)When use blade, it don't hurt the glass, there's no scratches on glass.
(b)When use laser, the laser can burn the glass, leave a unconspicuous scratches on glass. The scratches donot affect for sandblasting, ice sculpture, etc.
2)Use blade first, then use laser
The laser can be used for secondary operation, deep/further processing. For example: use the blade mode, carve a graphic, use sandblasting(or ice scalpture), now the glass has been rough, then if you want make other graphic on the graphic you just made, cause the glass is rough by sandblasting, you cannot use the blade mode, it will broke the needle, so the laser can do it(cause laser ray don't touch the glass). Then use painting or other process. This can make graduated oil painting glass and other more complex, beautiful art glass.
7. How can the thickness of glass be?
The glass thickness can be 2mm-30mm.
More questions please don't hesitate to contact us.
